New Arrivals/Restock

Designed with a built-in relay, the Lutron DVSTV-WH dimmer switch can dim a 0-10 volt LED light fixture without the additional purchase of a power pack. After simple installation, easily turn the lights on or off with the paddle switch and use the slide control to adjust the lights to your desired level.

FEATURES:

Large paddle switch with a captive linear-slide control for a standard designer-opening wallplate
0–10 V control link controls third party fixtures
DVSTV- wires as single pole or 3-way,
120–277 V~ switch
DVTV- wires as a 24 V- switch. A Power Pack is required to switch 120–277 V~ and 347 V~
Patented switching technology extends product lifetime
Coordinating Claro® and Satin Colors® wallplates (available separately)
High-end and low-end trim user adjustable for optimal performance

SPECIFICATIONS:

UL® Listed to US and Canadian safety requirements UL244A
120–277 V~ 50/60 Hz
Switch rating of 8 A
0–10 V control link for 50 mA maximum output, sink ONLY
0–10 V control link is Class 1
Controls up to 25 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast / driver to limit the current draw to 2.0 mA maximum)
Power Pack cannot be used with DVSTV- models.
Works with all ballasts and drivers that provide a current source compliant to IEC 60629 Annex E.2, and whose inrush current does not exceed NEMA410 standards for electronic ballast/driver loads of 8 A steady state current.
Adjustable high-end and low-end trim for optimal dimming performance.
Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.
Captive linear slider.
Precise color matching.
For Indoor Use Only.
Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity.
No derating required if ganged.
Night light not available.
Always consult local wiring codes.
1 Year Limited Warranty