Aviom BOOM-1 Tactile Transducer Processor

Aviom BOOM-1 Tactile Transducer Processor

Now you can feel your monitor mix, too. BOOM-1 is designed to dramatically enhance a performer's personal mixing experience by adding powerful, optimally-processed low-frequency tactile information to an in-ear or headphone monitor mix.

Key Features

• 1/4-inch TRS Stereo Headphone In and Thru
• Strength control with Signal and Clip LED indicators
• Three selectable Feel presets control multiple DSP settings for user-preferred Tight to Loose feel
• Custom tailor the response of the BOOM-1 to a variety of tactile transducers with the DSP Profile settings
• XLR mono input for direct connection to the A360 Personal Mixer

Technical Specifications

Headphone In (front & rear)
1/4-inch TRS stereo;
Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
Headphone Thru (front & rear)
1/4-inch TRS stereo;
Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
Line In
XLR female,
Pin 2: Hot, Pin 3: Cold; Pin 1: Ground
Maximum Input Level
15.98 dBV
Input Impedance
9.5k Ohm
Line Out
XLR balanced; mono; with Volume control
Maximum Output Level
12.55 dBV
Output Impedance
33.2 Ohms
Amplifier Output
4 Ohms - 210W
8 Ohms - 117W
Transducer Output
2-conductor locking speaker connector;
Power Supply
Internal, universal switching type, IEC connector;
100-240 volts AC, 50/60Hz
Fuse
250VAC~ T3AL
Dimensions
19" (482.6 mm) wide x 8.62" (219.07 mm) deep;
2U, 3.5" (88.9 mm) high
Weight
6.0 lbs (2.72 kg)